| MODEL |
CX-300 |
CX-400 |
CX-500 |
|
Mechanism |
Media-movement method |
|
Driving Method |
Digital control servo motor |
|
Maximum Cutting Area |
29" x 984-1/8"
(737mm
x 24,998mm) |
39"x 984-1/8"
(1000mm
x 24,998mm) | 47"
x 984-1/8"
(1,195mm x 24,998mm) |
| Acceptable
Media Width | 2"
to 36"
(50mm to 915mm) |
3-1/2" to 46"
(90mm
to 1,178 mm) | 3-1/2"
to 54"
(90mm to 1,372mm) |
| Cutting
Speed | During
cutting: 850 mm/sec. (in all directions)
During tool-up: 1,202mm/sec (in
45º direction) |
|
Cutting Force |
20 to 350 gf |
|
Mechanical Resolution |
0.000492"/step (0.0125 mm/step) |
|
Software Resolution |
0.000984"/step (0.025mm/step) |
|
Distance Accuracy |
Error of less than ± 0.2% of
distance traveled, or 0.000394 (0.1mm), whichever is greater |
|
Repetition Accuracy |
0.1mm or less (excluding stretching/contraction
of the material)
Range for assured repetition accuracy
For materials with
a width exceeding 24" (610mm): Length 157-7/16" (4,000mm) (CX-400/500
only)
For materials with a width of 24" (610mm) or less: Length 314-15/16"
(8,000mm) |
|
Interface |
Parallel (Centronics compatible),
USB (Rev. 1.1) |
|
Buffer Size |
2 MB (1.3MB for replot buffer) |
|
Instruction System |
CAMM-GL3 (mode1 and mode2) |
|
Power consumption |
Maximum: 0.8 a/100 V to 240 V ±
10 % 50/60Hz |
|
Acoustic noise level |
Cutting mode: under 62 dB (A) Standby
Mode: under 40 dB (A) (According to ISO 7779) |
| Dimensions |
45-1/16"(W) x 28-5/8"(D)
x 43-13/16"(H)
1,144 mm (W) x 727 mm (D) x 1113 mm (H) |
55-3/8"(W) x 28-5/8"(D)
x 43-13/16"(H)
1,407 mm (W) x 727 mm (D) x 1113 mm (H) |
63-1/16"(W) x 28-5/8"(D)
x 43-13/16"(H)
1,602 mm (W) x 727 mm (D) x 1113 mm (H) |
| Weight
(with stand) | 101.4lb.
(46 kg) | 116.8lb.
(53 kg) | 130.1
lb. (58 kg) |
|
Standard Accessories |
Power Cord: 1, Blade (ZEC-U5025):
1, Blade Holder (XD-CH3): 1, Alignment tool: 1, Cable Clamp: 1, Replacement blade
for separating knife: 1, Roland software package: 1,
Startup Manual: 1, Safe
Use Manual: 1 |
